登录    |    注册

您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>三聚甲醛制备瓶装甲醛气体标准物质的研究

三聚甲醛制备瓶装甲醛气体标准物质的研究

332    2020-08-19

¥0.50

全文售价

作者:聂巍, 周鑫, 董了瑜, 李志昂, 郑力文, 陈扬天

作者单位:中国测试技术研究院,四川 成都 610021


关键词:甲醛;气体标准物质;称量法定值;国际比对;准确度


摘要:

介绍一种三聚甲醛挥发经过转换器加热裂解得到甲醛的新方法, 通过补充适量的平衡气进行稀释,采用称量法制备得到目标浓度的高压瓶装甲醛气体标准物质。实验表明(210±5) ℃为最佳的裂解温度,采用气相色谱质谱联用的方法对裂解产物进行分析,甲醛的纯度为99.525%。使用经过内壁特殊处理的铝合金气瓶对研制的氮中甲醛气体标准物质进行存储,量值水平1~5 μmol/mol,成功通过国家二级标准物质定级评审,标物编号为GBW(E)083617。将研制的4.92 μmol/mol氮中甲醛气体标准物质,气瓶编号L55016195,送至英国国家物理研究院进行比对,测试结果为4.81 μmol/mol,采用En值进行判定,比对结果为满意,也进一步验证称量法制备定值得到的瓶装甲醛气体标准物质的准确性。


Research on preparation of cylinder formaldehyde gas reference material from trioxane
NIE Wei, ZHOU Xin, DONG Liaoyu, LI Zhiang, ZHENG Liwen, CHEN Yangtian
National Institute of Measurement and Testing Technology, Chengdu 610021, China
Abstract: A novel method for the preparation of formaldehyde from sublimate of trioxane followed by thermal conversion has been developed, filled by calculated balance gas for dilution, a high pressure cylinder gas standard of formaldehyde in nitrogen with gravimetric value has been prepared. The optimum temperature for decomposition was (210±5) ℃ and purity of formaldehyde was 99.525% by analyzing the conversion products using GC-MS. All mixtures were prepared in aluminum cylinders with passivation treated internally, this 1-5 μmol/mol gas reference material has acquired the second class of national certified reference material GBW(E)083617. A gravimetric cylinder(L55016195) static standard of 4.92 μmol/mol formaldehyde in a nitrogen matrix was produced and sent to NPL (National Physical Laboratory, UK) for an international comparison, the analysis value was 4.81 μmol/mol, indicated a satisfied comparability confirmed by En number and a reliable accuracy of static gravimetric value.
Keywords: formaldehyde;gas reference material;gravimetric value;international comparison;accuracy
2020, 46(8):70-75  收稿日期: 2020-06-27;收到修改稿日期: 2020-07-18
基金项目: 四川省科技服务业示范项目(2018GFW0187)
作者简介: 聂巍(1971-),女,四川成都市人,工程师,硕士,主要从事环境气体检测分析及气体标准物质制备的质量控制
参考文献
[1] 室内空气质量标准: GB/T 18883—2002[S]. 北京: 中国标准出版社, 2002.
[2] BREWER P J, MEANE E A, VARGHA G Y M, et al. Gaseous reference standards of formaldehyde from trioxane[J]. Talanta, 2013, 108: 83-87
[3] PANDA N, KIM M, AOKI N, et al. Validation of primary formaldehyde gas standards prepared by dynamic thermogravimetry through a tri-national comparison of gaseous formaldehyde amount fraction[J]. Accred Qual Assur, 2016, 21: 295-304
[4] JOËLE V, EDGAR F, FARAZ I, et al. CCQM-K90, formaldehyde in nitrogen, 2 μmol·mol–1 [J]. Metrologia, 2017, 54: 08029.
[5] 袁娇阳, 蒋昌怀, 王宇, 等. 氮中甲醛气体标准物质分析方法研究[J]. 化学试剂, 2020, 42(4): 411-415
[6] Gas analysis-Preparation of calibration gas mixture-Part 1: Gravimetric method for Class Ⅰ mixtures: ISO 6142—1[S]. Switzerland, 2015.
[7] MATSUMOTO N, WATANABE T, MARUYAMA M, et al. Development of mass measurement equipment using an electronic mass-comparator for gravimetric preparation of reference gas mixtures[J]. Metrologia, 2004, 41: 178-188
[8] ALINK A, VAN DER VEEN A M H. Uncertainty calculations for the preparation of primary gas mixtures[J]. Metrologia, 2000, 37(6): 641-650
[9] 方正, 周鑫, 霍玉朋, 等. 电子质量比较器在重量法配气中的称量不确定度评定[J]. 中国测试, 2016, 42(12): 38-41
[10] 周鑫, 李志昂, 董了瑜, 等. 注射称量法配气中的称量线性研究及不确定度评定[J]. 化学试剂, 2017, 39(5): 505-508
[11] 聂巍, 周鑫, 郑力文, 等. 环境空气监测用氮气中多组分醛酮气体标准物质的研制[J]. 化学试剂, 2020, 42(5): 557-562
[12] 全国标准物质计量技术委员会. 气体标准物质研制(生产)通用技术要求: JJF1344—2012[S]. 北京: 中国标准出版社, 2012.

澳门百乐宫有APP吗 博天堂娱乐下载 澳门皇浦娱乐网址 新得利 太阳城sunbet开户最高返点
澳门网上娱乐网址 外围体彩竞猜软件 云搏娱乐室 澳门凯时中秋优惠 网上鸿运赌场
太子游戏138 亿万先生总盘客服 申博太阳城博彩登入 大玩家娱乐平台 必發游戏真人占成
大奖投注1元起 mg线上游戏火热pk 申博投注 申博幸运轮盘登入 澳门皇马公司在哪